Epson S1D13506 Technical Manual page 407

Epson Research and Development
Vancouver Design Center
13506CFG Configuration Program
Issue Date: 01/03/14
Panel Data Width
Single / Dual
Disable Dual Panel Buffer
Mono / Color
Format 2
FPLINE Polarity
FPFRAME Polarity
Panel Dimensions
Selects the panel data width. Panel data width is the
number of bits of data transferred to the LCD panel on
each clock cycle and shouldn't be confused with color
depth which determines the number of displayed colors.
When the panel type is STN, the available options are 4
bit, 8 bit, and 16 bit. When the panel type is TFT the
available options are 9 bit, 12 bit, and 18 bit.
Selects between a single or dual panel.
When the panel type is TFT, "Single" is automatically
selected and the "Dual" option is grayed out.
The Dual Panel Buffer is used with dual STN panels to
improve image quality by buffering display data in a
format directly usable by the panel.
This option is primarily intended for testing purposes. It
is not recommended that the Dual Panel Buffer be
disabled as a reduction of display quality will result.
Selects between a monochrome or color panel.
Selects color STN panel format 2. This option is specif-
ically for configuring 8-bit color STN panels.
See the S1D13506 Hardware Functional Specification,
document number X25B-A-001-xx, for description of
format 1 / format 2 data formats. Most new panels use
the format 2 data format.
Selects the polarity of the FPLINE pulse.
Refer to the panel specification for the correct polarity
of the FPLINE pulse.
Selects the polarity of the FPFRAME pulse.
Refer to the panel specification for the correct polarity
of the FPFRAME pulse.
These fields specify the panel width and height. A
number of common widths and heights are available in
the selection boxes. If the width/height of your panel is
not listed, enter the actual panel dimensions into the edit
field.
Manually entered panel widths must be a multiple of
Page 17
S1D13506
X25B-B-001-02