Epson S1D13506 Technical Manual page 343

Epson Research and Development
Vancouver Design Center
int seGetId(int * pId)
Description:
Parameters:
Return Value:
Note
Programming Notes and Examples
Issue Date: 02/03/21
Reads the S1D13506 revision code register to determine the controller product and revi-
sion.
pId A pointer to an integer to receive the controller ID. The value returned
is an interpreted version of the controller identification.
For the S1D13506 the return values are:
ID_S1D13506_REV0 S1D13506 Test Sample version.
ID_S1D13506_REV1 S1D13506 Production version
ID_UNKNOWN
ERR_OK
ERR_UNKNOWN_DEVICE
seGetId() will disable hardware suspend on x86 platforms, and enables the Memo-
ry/Register Select bit (REG[001h] bit 7) on all platforms.
The HAL was unable to identify the controller.
The operation completed with no problems
Return value when pID is ID_UNKNOWN.
Page 109
S1D13506
X25B-G-003-04