Applying Mac Extended Acls To Interfaces; Acl Ingress Port Configuration - Supermicro SSE-F3548S User Manual

Step 2 no mac access-list extended { <access-list-
number> | <access-list-name> }
Step 3 show access-lists
Step 4 write startup-config
The example below shows how to remove a MAC Extended ACL.
SMIS# configure terminal
SMIS(config)# no mac access-list extended 50

8.2.4 Applying MAC Extended ACLs to Interfaces

MAC Extended ACLs are applied to all physical interfaces by default. If users prefer to apply any MAC
Extended ACL only to certain ports, the steps below need to be followed.

8.2.5 ACL Ingress Port Configuration

User can associate an ACL with multiple ingress ports. Follow the steps below to add ingress port(s) to an
ACL.
Step Command
Step 1 configure terminal
Step 2
Interface <interface-type><interface-
id>
or
interface range <interface-type><interface-id> ....
Step 3
mac access-group { <short (1-32768)> |
<string(32)>} in
Step 4 show access-lists
Step 5 write startup-config
Supermicro SSE-F3548S/SSE-F3548SR Configuration User's Guide
Deletes a MAC Extended ACL using no
mac-access-list extended command.
access-list-number – the ACL number
that needs to be deleted
access-list-name – the name of the ACL
that needs to be deleted
Displays the configured ACL rules to
make sure the deleted ACL is removed
properly
Optional step – Saves this ACL
configuration to be part of startup
configuration.
Description
Enters the configuration mode
The port or port lists on which this
MAC Extended ACL needs to be
applied.
Adds the MAC Extended ACL to this
port.
access-list-number – the ACL number
that needs to be added
access-list-name – the name of the
ACL that needs to be added
Displays the configured ACL rules to
make sure this port is added to the
required ACL.
Optional step – Saves this ACL
configuration to be part of startup
configuration.
223