Brocade Communications Systems Brocade 8/12c User Manual page 917

4. And - Indicate how often the policy is to be repeated. You can choose one of the following
5. In the Message field, enter the message that will be displayed in the Event Log for the
6. From the Severity list, select the severity you want to assign to the generated event.
7.
8. The Actions Group - Actions pane of the Edit Event Action dialog box displays. Proceed to
Brocade Network Advisor SAN User Manual
53-1002167-01
-
Click Time bound (act at the end of the duration specified) if you want the Management
application to perform the specified action once the specified number of occurrences has
occurred and the specified duration has elapsed. For example, if you want the action to be
applied when 10 link down traps occur during a one-minute duration, the Management
application waits until 10 link down traps occur and one minute has elapsed before the
defined action is applied. There is a one-second delay for the action to be applied.
For either option, if the number of occurrences has not been met and the time duration
has elapsed, the observation window is advanced to the next occurrence after the first
occurrence on the current window.
options:
-
Repeat immediately - Repeats the policy as soon as the specified action has been applied.
-
Repeat after suppressing for ____ minutes or hours - If this parameter is selected, the
policy will not be applied to the product for the specified duration of time. Enter the
duration in minutes or hours. You can suppress the policy just for the events specified in
the policy or for any event that occurs on the product. Once the duration expires, the policy
can be repeated.
-
This event only - If you select this option, the policy will not be repeated for the specified
duration of time only if the events specified in this policy occur. For example, a policy is set
to log link down traps if they occur 10 times within one minute and this parameter is
selected to repeat the policy after 20 minutes. If 10 traps occur in one minute, the
Management application policy waits for 20 minutes before it starts listening for new link
down traps.
-
All events for this device (Admin Status–Troubleshooting) - This option is available if you
have the Troubleshoot Device privilege in your Management application user account or
role. It places the product in troubleshooting mode if the criteria in the policy are meet. For
example, a policy is set to log link down traps if they occur 10 times within one minute. If
10 traps occur in one minute, and the Repeat after suppressing for ____minutes or hours
parameter is set to 20 minutes, the Management application policy stops listening to any
event for 20 minutes. After 20 minutes, the product returns to normal operating mode and
the policy takes effect again.
generated event. This entry replaces the default message that is displayed for a trap. Also, this
message is used as the Event Action message and is displayed in single quotes on the Event
Log report.
NOTE
The Message parameter is required if you selected One Entity for the Selected Product/Port
Group members treated as parameter on the Sources pane of the Add Event Action dialog box.
It is optional if you selected Individual for that parameter.
Click Next.
"Editing event actions".
Event action definitions
30
873