Redistribute Routes - Dell Force10 C150 Configuration Manual

Command Syntax
seq sequence-number {deny |permit} ip-prefix
[ge min-prefix-length] [le max-prefix-length]
For configuration information on prefix lists, refer to
chapter in the FTOS Configuration Guide
Use the following commands in CONFIGURATION-ROUTER OSPF mode to apply prefix lists to
incoming or outgoing OSPF routes
Command Syntax
distribute-list
prefix-list-name
distribute-list
prefix-list-name
isis | rip | static ]

Redistribute routes

You can add routes from other routing instances or protocols to the OSPF process. With the
command syntax, you can include RIP, static, or directly connected routes in the OSPF process.
Note: Do not route iBGP routes to OSPF unless there are route-maps associated with the OSPF
redistribution.
Use the following command in CONFIGURATION- ROUTER-OSPF mode to redistribute routes:
Command Syntax
redistribute { bgp | connected | isis |
rip | static } [ metric
metric-value
metric-type ] [ route-map
type-value
] [ tag
map-name tag-value
Command Mode
CONFIG- PREFIX
LIST
in [
]
interface
out [ connected |
Command Mode
CONFIG-ROUTER-
| OSPF-id
]
Usage
Create a prefix list with a sequence
number and a deny or permit action. The
optional parameters are:
ge min-prefix-length: is the minimum
prefix length to be matched (0 to 32).
le
max-prefix-length:
length to be matched (0 to 32).
IP Access Control Lists, Prefix Lists, and Route-maps
.
Command Mode
CONFIG-ROUTER-
OSPF-id
CONFIG-ROUTER-
OSPF-id
Usage
Specify which routes will be redistributed into OSPF
process. Configure the following required and
optional parameters:
bgp, connected ,
•
of the keyword to redistribute those routes. rip is
supported only on E-Series.
metric
•
metric-type
•
route type 1 or 2 for OSPF external route type 2.
route-map
•
configured route map.
tag
•
tag-value
Open Shortest Path First (OSPFv2 and OSPFv3) | 721
is the maximum prefix
Usage
Apply a configured prefix list to incoming
OSPF routes.
Assign a configured prefix list to outgoing
OSPF routes.
, rip , or static : enter one
isis
range: 0 to 4294967295.
metric-value
: 1 for OSPF external
metric-type
: enter a name of a
map-name
range: 0 to 4294967295.
.
redistribute