Enable Snooping Explicit Tracking; Display The Mld Snooping Table; Mldv2 Snooping; Port Inheritance On Mixed Mld Mode Vlans - Dell Force10 C150 Configuration Manual

View the ports that are connected to multicast routers using the command
from EXEC Privilege mode.

Enable Snooping Explicit Tracking

The switch can be a querier, and therefore also has the option of updating the group table through
explicit-tracking (see
is enabled, the switch tracks all MLD joins. It has separate explicit tracking table which contains group,
source, interface, VLAN and reporter details.
Task
Configure the system to remove a group
immediately after receiving a Leave message.
Display the MLD explicit-tracking table.

Display the MLD Snooping Table

Task
Display the MLD Snooping table.
Display group information in the table. Group
information can be filtered, see the FTOS
Command Line Reference for the options available
with this command.

MLDv2 Snooping

With MLDv1 Snooping, multicast forwarding tables are formed for a group, G, based on received MLDv1
reports. With MLDv2 Snooping, multicast forwarding tables are formed for a source and group pair, (S,G),
based on received MLDv2 include reports. MLDv2 Snooping is compatible with MLDv1 hosts and selects
a port as dynamic mrouter port when it receives Membership Query on that port.

Port Inheritance on Mixed MLD Mode VLANs

A mixed MLD mode VLAN is one which has multiple hosts belonging to the same group, but some hosts
exclude a source (S,G), and others include the same source (S,G).
Explicit Tracking on page
Command Syntax
ipv6 mld snooping explicit-tracking
show ipv6 mld snooping groups explicit
Command Syntax
show ipv6 mroute mld
show ipv6 mld snooping groups
610). Whether the switch is the Querier or not, if snooping
show ipv6 mld snooping mrouter
Command Mode
VLAN INTERFACE
EXEC Privilege
Command Mode
EXEC Privilege
EXEC Privilege
Multicast Listener Discovery | 613