Dell Force10 C150 Configuration Manual page 724

Use the following command in EXEC Privilege mode to configure the debugging options of an OSPFv2
process:
Command Syntax
debug ip ospf process-id
[ event | packet | spf ]
To display a summary of the information stored in the OSPFv2 database of the router, enter the
ospf database database-summary
restarting neighbor OSPFv2 routers are also displayed.
Command Syntax
show ip ospf database
database-summary
Figure 32-21. Command Example: show ip ospf database database-summary
FTOS#show ip ospf database database-summary
!
OSPF Router with ID (200.1.1.1) (Process ID 1)
724 | Open Shortest Path First (OSPFv2 and OSPFv3)
Command Mode
EXEC Privilege
Command Mode
EXEC Privilege
Area ID Router Net
0 4
Usage
View debug messages.
To view debug messages for a specific OSPF process ID, enter
debug ip ospf process-id.
If you do not enter a process ID, the command applies to the
first OSPF process.
To view debug messages for a specific operation, enter one of
the optional keywords:
event : View OSPF event messages
•
packet : View OSPF packets.
•
spf : View shortest path first (spf) information.
•
command. Note that the number of Type-9 Grace LSAs received from
Usage
View a summary of OSPFv2 database information.
S-Net S-ASBR Type7
3 3000 0 0
Type9 Type10 Total ChSum
1 0 3008 0x5e69164
show ip