Dell Force10 C150 Configuration Manual page 1223

Figure 62-2. Verifying the Offline/Online Status of an S-Series Stack Unit
FTOS#show system brief | no-more
Stack MAC : 00:01:e8:d6:02:39
-- Stack Info --
Unit UnitType Status
---------------------------------------------------------------------------
0 Standby online
1 Management offline S50N
2 Member online
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
-- Module Info --
Unit Module No Status
---------------------------------------------------------------------------
0 0 online
0 1 online
1 0 online
1 1 online
2 0 not present
2 1 offline
-- Power Supplies --
Unit Bay Status
---------------------------------------------------------------------------
0 0 up
0 1 absent
1 0 up
1 1 absent
2 0 up
2 1 absent
3. Start diagnostics on the unit using the command
complete, the system displays syslog
are printed to a file in the flash using the filename format TestReport-SU-<stack-unit>.txt.
Message 2 Offline Diagnostics Complete
FTOS#00:09:32 : Diagnostic test results are stored on file: flash:/TestReport-SU-1.txt
00:09:37: %S50N:1 %DIAGAGT-6-DA_DIAG_DONE: Diags finished on stack unit 1
Diags completed... Rebooting the system now!!!
As shown in Figure 62-3
standalone unit and on a stack member.
ReqTyp
S25V S25V
S50N
S25P
Module Type
S50-01-10GE-2C
S50-01-12G-2S
S50-01-10GE-2P
S50-01-12G-2S
No Module
S50-01-12G-2S
Type
AC
AC
AC
Message
and Figure 62-4, log messages differ somewhat when diagnostics are done on a
CurTyp Version
4.7.7.220 28
4.7.7.220 52
S25P 4.7.7.220
Ports
2
2
2
2
0
2
diag
, as shown in Figure
2, and automatically reboots the unit. Diagnostic results
S-Series Debugging and Diagnostics | 1223
Ports
28
62-3. When the tests are