Dell Force10 C150 Configuration Manual page 1030

To manually assign a new unit a position in the stack:
Step Task
1 While the unit is unpowered, install stacking modules in the new unit.
2 On the stack, determine the next available stack-unit
number, and the management prioritity of the
management unit.
3 Create a virtual unit and assign it the next available
stack-unit number.
4 On the new unit, number it the next available stack-unit
number.
5 (OPTIONAL) On the new unit, assign a management
priority based on whether you want the new unit to be
the stack manager.
6 Connect the new unit to the stack using stacking cables.
Figure 50-12. Adding a Stack Unit with a Conflicting Stack Number—Before
------------------------STANDALONE BEFORE CONNECTION----------------------------------
Standalone#show system brief
Stack MAC : 00:01:e8:d5:ef:81
-- Stack Info
Unit UnitType
---------------------------------------------------------------------------
0 Member
1 Management
2 Member
3 Member
4 Member
5 Member
6 Member
7 Member
[output omitted]
-----------------------------STACK BEFORE CONNECTION----------------------------------
Stack#show system brief
Stack MAC : 00:01:e8:d5:f9:6f
-- Stack Info
Unit UnitType
---------------------------------------------------------------------------
0 Member
1 Management
2 Standby
3 Member
4 Member
5 Member
6 Member
7 Member
[output omitted]
1030 | Stacking S-Series Switches
--
Status ReqTyp
not present S50V
online S50V
not present
not present
not present
not present
not present
not present
--
Status ReqTyp
not present
online S50N
online S50V
not present
not present
not present
not present
not present
Command Syntax
show system brief
show system stack-unit
stack-unit provision
stack-unit renumber
stack-unit priority
CurTyp Version
S50V 7.8.1.0
CurTyp Version
S50N 7.8.1.0
S50V 7.8.1.0
Command Mode
EXEC Privilege
CONFIGURATION
EXEC Privilege
CONFIGURATION
Ports
52
Ports
52
52