Task
Specify the hash algorithm seed.
In
Figure
14-1, Core Router 1 is an E-Series TeraScale and Core Router 2 is an E-Series ExaScale. They
have similar configurations and have routes for prefix P with two possible next-hops. When Deterministic
ECMP is enabled and the hash algorithm and seed are configured the same, each flow is consistently sent
to the same next hop even though they are routed through two different chassis.
Figure 14-1. Deterministic ECMP Next Hop + Configurable Hash Algorithm Seed
Core Router 1
TeraScale
Next-hop 1
Next-hop 1
Command Syntax
hash-algorithm seed value
port-set number
[
Range: 0 - 4095
Backbone router
Core Router 2
ExaScale
Next-hop 2
Prefix: P
linecard number
[
]
Command Mode
]
CONFIGURATION
Equal Cost Multi-Path | 333