Provide Administrator Contact Information - Dell Force10 C150 Configuration Manual

Per-recipient, you have a choice of sending FTSA E-mails in clear text or with PGP5 encryption. Messages
to the default recipient are configured for encryption using a public encryption key, as shown in
Figure 16-2.
Step Task
1 Copy the encryption key file to the
internal flash. The key
Force10DefaultPublicKey for the
default recipient is packed with FTOS,
so enable encryption for it, proceed to
Step 3.
2 Specify the key with which E-mails to
the recipient will be encrypted.
3 Encrypt E-mails to the recipient.
Create a PGP5 encryption key
Step Task
1 Use a PGP5-compatible program such as PGP or GnuPG to generate the public or private key. The user name that
you choose in the program will be the one that you use in the
2 Export the public key to a file.

Provide Administrator Contact Information

Dell Force10 recommends that you provide administrator contact information so that it can be included in
Type 3 or greater E-mails.
Task
Provide the postal service mailing address at which the network
administrator can be contacted.
Provide the E-mail address at which the network administrator can be
contacted.
Provide the name of the network administrator to be contacted upon an
FTSA trigger event.
Include a memo in FTSA messages.
Provide the phone number of the network administrator to be contacted
upon an FTSA trigger event.
Note: The contact fields may contain any character, however, be aware that FTSA generates all messages are
XML format, for example <contact-name> </contact-name>, so non-alphanumeric characters might create XML
errors.
Command
copy source-path file flash://
/
keyfilename
keyadd
keyfilename
encrypt
server
Command Mode
EXEC Privilege
CALLHOME<SERVER-LABEL>
CALLHOME<SERVER-LABEL>
command.
Command Command Mode
contact-address
CALLHOME
contact-email
CALLHOME
contact-name
CALLHOME
contact-notes
CALLHOME
contact-phone
CALLHOME
Force10 Service Agent | 353