Dell Force10 C150 Configuration Manual page 781

• When an extended ACL is associated with this command, FTOS displays an error message. If you
apply an extended ACL before you create it, FTOS accepts the configuration, but when the ACL is
later defined, FTOS ignores the ACL and the stated mapping has no effect.
Display the source to which a group is mapped using the command
shown in Figure 35-4 on page
mapping even if the group is not currently in the IGMP group table. If you do not specify the
then the display is a list of groups currently in the IGMP group table that have a group-to-source mapping.
Display the list of sources mapped to a group currently in the IGMP group table using the command
ip igmp groups group detail
783. If use the
group
, as shown in Figure 35-4 on page
show ip igmp ssm-map
option, the command displays the group-to-source
783.
[ ], as
group
option,
group
show
PIM Source-Specific Mode | 781