Show Hardware Commands - Dell Force10 C150 Configuration Manual

Figure 60-11. debug Command Tree
FTOS#debug ?
aaa
arp
cpu-traffic-stats
dot1x
ftpserver
ifm
ip
ntp
ppp
radius
spanning-tree
tacacs+

show hardware commands

show hardware
The
changed specially for use with the C-Series. These commands display information from a hardware
sub-component, such as an FP or CSF ASIC, and from hardware-based feature tables.
Table 60-3
Note: show hardware commands should only be used under the guidance of Dell Force10 Technical
Assistance Center.
Table 60-3. show hardware Commands
Command
show hardware interface phy
show hardware drops
show hardware rpm mac counters
clear hardware rpm mac counters
show hardware rpm mac port-statistics
clear hardware rpm mac port-statistics
show hardware rpm cpu management
show hardware cpu party-bus
clear hardware cpu party-bus
1180 | C-Series Debugging and Diagnostics
AAA debug information
IP ARP debug information
Start collecting CPU traffic statistics
Dot1x debug information
FTP Server debug information
IFM Debug information
IP debug information
NTP debug information
PPP debug commands
RADIUS debug information
Spanning tree debug information
TACACS+ debug information
command tree consists of EXEC Privilege commands that have been created or
show hardware
lists the commands available as of the latest FTOS version.
Description
View link status information, including the transmitted and received
auto-negotiation control words.
registers
Use the keyword to capture a dump of key PHY registers for
your technical support representative.
View internal packet-drop counters on a line card or RPM
counters
Enter the keyword
transmit frame counters for the party bus switch in the IPC subsystem on
the RPM.
port-statistics
Enter the keyword
statistics for the specified port on the party bus switch.
View internal interface status information for the RPM CPU port which
connects to the external management interface.
View or clear statistics for the party-bus port on the CPU of the specified
line card or RPM.
keyword to view or clear the receive and
to view or clear detailed Ethernet