Simple Network Management Protocol; Protocol Overview; Implementation Information; Configure Simple Network Management Protocol - Dell Force10 C150 Configuration Manual

Simple Network Management Protocol

Simple Network Management Protocol
SNMP is supported on the E-Series ExaScale platform with FTOS 8.1.1.0 and later.
Note: On Dell Force10 routers, standard and private SNMP MIBs are supported, including all Get and a
limited number of Set operations (such as set vlan and copy cmd).

Protocol Overview

Network management stations use Simple Network Management Protocol (SNMP) to retrieve or alter
management data from network elements. A datum of management information is called a managed
object; the value of a managed object can be static or variable. Network elements store managed objects in
a database called a Management Information Base (MIB).
MIBs are hierarchically structured and use object identifiers to address managed objects, but managed
objects also have a textual name called an object descriptor.

Implementation Information

• FTOS supports SNMP version 1 as defined by RFC 1155, 1157, and 1212, SNMP version 2c as
defined by RFC 1901, and SNMP version 3 as defined by RFC 2571.
• FTOS supports up to 15 trap receivers.
• The FTOS implementation of the sFlow MIB supports sFlow configuration via SNMP sets.
• SNMP traps for STP and MSTP state changes are based on BRIDGE MIB (RFC 1483) for STP and
IEEE 802.1 draft ruzin-mstp-mib-02 for MSTP.

Configure Simple Network Management Protocol

Note: The configurations in this chapter use a Unix environment with net-snmp version 5.4. This is only
one of many RFC-compliant SNMP utilities you can use to manage your Dell Force10 system using
SNMP. Also, these configurations use SNMP version 2c.
is supported on platforms
48
c e s
Simple Network Management Protocol | 983