Take The Line Card Offline; Run Offline Diagnostics; View Offline Diagnostic Test Results - Dell Force10 C150 Configuration Manual

• The complete diagnostics test suite normally runs for 4 to 6 minutes; the 48-port 1-Gigabit line card
takes slightly longer than the 4-port 10-Gigabit line card.

Take the line card offline

Place the line card in an offline state using the
Figure 60-12. offline linecard Command Example
FTOS#offline linecard 5
00:50:05: %RPM0-P:CP %CHMGR-2-CARD_DOWN: Line card 5 down - card offline
00:50:05: %RPM0-P:CP %IFMGR-1-DEL_PORT: Removed port: Te 5/0-3
show linecard all
Use the
Figure 60-13. show linecard all Command Example
FTOS#show linecard all
-- Line cards --
Slot Status NxtBoot
---------------------------------------------------------------------------
0 not present
1 online online
2 not present
3 not present
4 not present
5 not present
6 offline online
FTOS#

Run offline diagnostics

Start diagnostics on the line card using the
Figure 60-14. diag linecard Command Example
FTOS#diag linecard 5
FTOS#00:50:44: %EX4PB:5 %DIAGAGT-6-DA_DIAG_STARTED: Starting diags on slot 5
00:50:44 : Approximate time to complete these Diags ... 5 Min
FTOS#

View offline diagnostic test results

show diag
Use the command to view a brief report of the test results, as shown in
offline linecard
command to confirm offline status, as shown in
ReqTyp CurTyp
E48TB E48TB
E48TB E48TB
diag linecard
command, as shown in
Figure
Version Ports
2.2.1.1 48
2.2.1.1 48
command, as shown in
C-Series Debugging and Diagnostics | 1185
Figure 60-12.
60-13.
Figure 60-14.
Figure 60-15.