Dell Force10 C150 Configuration Manual page 1031

Ftos configuration guide ftos 8.4.2.7 e-series terascale, c-series, s-series (s50/s25)

Hide thumbs Also See for Force10 C150:

Table of Contents

Figure 50-13. Adding a Stack Unit with a Conflicting Stack Number—After

------------------------STANDALONE AFTER CONNECTION----------------------------------

00:08:45: %STKUNIT1-M:CP %POLLMGR-2-ALT_STACK_UNIT_STATE: Alternate Stack-unit is present

00:08:45: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 0 present

00:08:47: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 2 present

Going for reboot. Reason is Stack merge

[bootup messages omitted]

Stack(stack-member-0)#

-----------------------------STACK AFTER CONNECTION----------------------------------

Stack#21:27:22: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 0 present

21:27:39: %STKUNIT1-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 0 down - card removed

21:28:24: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 0 present

21:28:33: %STKUNIT1-M:CP %CHMGR-5-CHECKIN: Checkin from Stack unit 0 (type S50V, 52 ports)

21:28:33: %S50V:0 %CHMGR-0-PS_UP: Power supply 0 in unit 0 is up

21:28:34: %STKUNIT1-M:CP %CHMGR-5-STACKUNITUP: Stack unit 0 is up

Stack#show system brief

Stack MAC : 00:01:e8:d5:f9:6f

---------------------------------------------------------------------------

[output omitted]

Figure 50-14. Adding a Stack Unit with a Conflicting Stack Provision—Before

------------------------STANDALONE BEFORE CONNECTION----------------------------------

Standalone#show system brief

Stack MAC : 00:01:e8:d5:ef:81

---------------------------------------------------------------------------

[output omitted]

-----------------------------STACK BEFORE CONNECTION----------------------------------

Stack#show system brief

Stack MAC : 00:01:e8:d5:f9:6f

---------------------------------------------------------------------------

[output omitted]

Stacking S-Series Switches | 1031

Show Quick Links

Table of Contents

Troubleshooting