Assign An Ip Address To A Port Channel; Delete Or Disable A Port Channel - Dell Force10 C150 Configuration Manual

To add a port channel to a VLAN, use either of the following commands:
Command Syntax
tagged port-channel
id number
untagged port-channel
To remove a port channel from a VLAN, use either of the following commands:
Command Syntax
no tagged port-channel
no untagged port-channel
To see which port channels are members of VLANs, enter the
mode.

Assign an IP address to a port channel

You can assign an IP address to a port channel and use port channels in Layer 3 routing protocols.
To assign an IP address, use the following command in the INTERFACE mode:
Command Syntax
ip address
ip-address mask

Delete or disable a port channel

To delete a port channel, you must be in the CONFIGURATION mode and use the
portchannel
channel-number
When you disable a port channel (using the
operationally down also.
Command Mode
INTERFACE
VLAN
INTERFACE
id number
VLAN
Command Mode
INTERFACE
id number
VLAN
INTERFACE
id number
VLAN
Command Mode
[ secondary ]
INTERFACE
command.
Purpose
Add the port channel to the VLAN as a tagged
interface. An interface with tagging enabled can
belong to multiple VLANs.
Add the port channel to the VLAN as an untagged
interface. An interface without tagging enabled can
belong to only one VLAN.
Purpose
Remove the port channel with tagging enabled
from the VLAN.
Remove the port channel without tagging
enabled from the VLAN.
show vlan
Purpose
Configure an IP address and mask on the interface.
•
ip-address mask:
dotted-decimal format (A.B.C.D) and the mask
must be in slash format (/24).
secondary: the IP address is the interface's
•
backup IP address. You can configure up to eight
secondary IP addresses.
shutdown
command) all interfaces within the port channel are
command in the EXEC Privilege
enter an address in
no interface
Interfaces | 435