Dell Force10 C150 Configuration Manual page 932

To select TACACS as the login authentication method, use these commands in the following sequence in
the CONFIGURATION mode:
Step Command Syntax
tacacs-server host
1
ipv6-address
aaa authentication login
2
{ method-list-name
[... method3
line aux 0
3 {
[
end-number
login authentication
4
default
}
To view the configuration, use the
command in the EXEC Privilege mode.
If authentication fails using the primary method, FTOS employs the second method (or third method, if
necessary) automatically. For example, if the TACACS+ server is reachable, but the server key is invalid,
FTOS proceeds to the next authentication method. In
is still authenticated by the secondary method.
932 | Security
{ ipv4-address |
| host }
default tacacs+
| }
]
console 0 vty number
| |
]}
{
method-list-name
show config
Command Mode
CONFIGURATION
CONFIGURATION
CONFIGURATION
| LINE
in the LINE mode or the
Figure 45-4, the TACACS+ is incorrect, but the user
Purpose
Configure a TACACS+ server host. Enter
the IP address or host name of the
TACACS+ server.
Use this command multiple times to
configure multiple TACACS+ server hosts.
Enter a text string (up to 16 characters
long) as the name of the method list you
wish to use with the TACAS+
authentication method
tacacs+
The method should not be the last
method specified.
Enter the LINE mode.
Assign the to the terminal line.
method-list
show running-config tacacs+