Dell Force10 C150 Configuration Manual page 581

During an RPM Failover
In the event that an RPM failover occurs, FEFD will become operationally down on all enabled ports for
approximately 8-10 seconds before automatically becoming operational again.
Figure 25-15. FEFD state change during an RPM failover
02-05-2009 12:40:38
%RPM1-S:CP %RAM-6-FAILOVER_REQ: RPM failover request from active peer: User request.
02-05-2009 12:40:38
%RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Gi 0/45
02-05-2009 12:40:38
%RPM1-P:CP %FEFD-5-FEFD-BIDIRECTION-LINK-DETECTED: Interface Gi 0/45 has bidirectional link with its
peer
Local7.Debug 10.16.151.12
Local7.Debug 10.16.151.12
Local7.Debug 10.16.151.12
Feb 5 07:06:09:
Feb 5 07:06:19:
Feb 5 07:06:19:
Layer 2 | 581