Set The Time And Date For The Switch Hardware Clock; Set The Time And Date For The Switch Software Clock - Dell Force10 C150 Configuration Manual

Set the time and date for the switch hardware clock

Command Syntax
calendar set time month day year

Set the time and date for the switch software clock

You can change the order of the month and day parameters to enter the time and date as time day month
year. You cannot delete the software clock.
1078 | System Time and Date
Command Mode Purpose
EXEC Privilege Set the hardware clock to the current time and date.
time:
hour variable, use the 24-hour format, for example,
17:15:00 is 5:15 pm.
month:
English.
You can enter the name of a day to change the order of the
display to
day:
Range: 1 to 31.
You can enter the name of a month to change the order of
the display to
year:
Range: 1993 to 2035.
FTOS#calendar set 08:55:00 september 18 2009
FTOS#
Enter the time in hours:minutes:seconds. For the
Enter the name of one of the 12 months in
time day month year
.
Enter the number of the day.
time day month year
Enter a four-digit number as the year.