Recognize A High Cpu Condition; Configure An Action Upon A Hardware Error; Buffer Traffic Manager Hardware Errors - Dell Force10 C150 Configuration Manual

Recognize a high CPU condition

A high CPU condition exists when any of the messages in
Message 14 High CPU Condition
Feb 13 13:56:16: %RPM1-S:CP %CHMGR-5-TASK_CPU_THRESHOLD: Cpu usage above threshold for task
"sysAdmTsk"(100.00%) in CP.
Feb 13 13:56:20: %RPM1-S:CP %CHMGR-5-CPU_THRESHOLD: Overall cp cpu usage above threshold.
Cpu5SecUsage (100)
Feb 13 13:56:20: %RPM1-S:CP %CHMGR-5-TASK_CPU_THRESHOLD_CLR: Cpu usage drops below threshold
for task "sysAdmTsk"(0.00%) in CP.

Configure an action upon a hardware error

You can configure FTOS to take an action if it encounters an BTM, FPC, or MAC hardware error.

Buffer traffic manager hardware errors

FTOS displays Message
In this case, configure an action using the command
You may place the line card in a problem state, reset the card, or shutdown all ports on the card.
Message 15 Queue Memory Error
%RPM0-P:CP %CHMGR-1-QMERR_RDBE: (0x30004) Double bit error detected in SRAM pointer memory on
Ingress BTM port-pipe 0 Line card slot 9.
%RPM0-P:CP %CHMGR-1-QMERR_RDBE: (0x30004) Double bit error detected in SRAM pointer memory on
Egress BTM port-pipe 0 Line card slot 9.
Message 16 Buffer Memory Error
RPM0-P:CP %CHMGR-3-BM_STATUS_DBE: Double-bit error detected when reading internal header from
buffer memory on Ingress BTM port-pipe 0 Line card slot 9. Check for temporary or sustained
packet loss with show hardware commands.
%RPM0-P:CP %CHMGR-3-BM_STATUS_DBE: Double-bit error detected when reading internal header
from buffer memory on Egress
sustained packet loss with show hardware commands.
15, Message 16, Message
BTM port-pipe 0 Line card slot 9. Check for temporary or
Message 14 appear.
17, or Message 18 depending on the type of BTM error.
hardware monitor linecard asic btm action-on-error
E-Series TeraScale Debugging and Diagnostics | 1217
.