Figure 17-2. GVRP Configuration Overview
Edge Switches
VLANs 70-80
VLANs 10-20
VLANs 30-50
Basic GVRP configuration is a 2-step process:
1. Enable GVRP globally. See page 376.
2. Enable GVRP on an interface. See page 376.
Related Configuration Tasks
•
Configuring GVRP Registration on page 376
•
Configuring a GARP Timer on page 377
Enabling GVRP Globally
Enable GVRP for the entire switch using the command
in
Figure
17-3. Use the
GVRP is configured globally
and on all VLAN trunk ports
for the edge and core switches.
Core Switches
NOTES:
VLAN 1 mode is always fixed and cannot be configured
All VLAN trunk ports must be configured for GVRP
All VLAN trunk ports must be configured as 802.1Q
show gvrp brief
command to inspect the global configuration.
Edge Switches
gvrp enable
in CONFIGURATION mode, as shown
GARP VLAN Registration Protocol | 375
VLANs 10-20
VLANs 30-50
VLANs 70-80