Dell Force10 C150 Configuration Manual page 1079

The software clock runs only when the software is up. The clock restarts, based on the hardware clock,
when the switch reboots.
Command Syntax
clock set time month day year
Command Mode Purpose
EXEC Privilege Set the system software clock to the current time and
date.
time:
hour variable, use the 24-hour format, for example,
17:15:00 is 5:15 pm.
month:
English.
You can enter the name of a day to change the order of the
display to
day:
Range: 1 to 31.
You can enter the name of a month to change the order of
the display to
year:
Range: 1993 to 2035.
FTOS#clock set 16:20:00 19 september 2009
FTOS#
Enter the time in hours:minutes:seconds. For the
Enter the name of one of the 12 months in
time day month year
.
Enter the number of the day.
time day month year
Enter a four-digit number as the year.
System Time and Date | 1079