Configure Lldp-Med For An Office Voip Deployment - Dell Force10 C150 Configuration Manual

Figure 36-8. Creating VLANs for an Office VOIP Deployment
FTOS#show running-config interface configured
!
interface GigabitEthernet 6/0
no ip address
no shutdown
!
interface GigabitEthernet 6/10
no ip address
portmode hybrid
switchport!
power inline auto
no shutdown
!
interface Vlan 100
description "Data VLAN"
no ip address
untagged GigabitEthernet 6/10-11,22-23,46-47
shutdown
!
interface Vlan 200
description "Voice VLAN"
no ip address
tagged GigabitEthernet 6/10-11,22-23,46-47
shutdown
!
interface Vlan 300
description "Voice Signaling VLAN"
no ip address
tagged GigabitEthernet 6/10-11,22-23,46-47
shutdown

Configure LLDP-MED for an Office VOIP Deployment

VOIP deployments may optionally use LLDP-MED. LLDP-MED advertises VLAN, dot1P, and DSCP
configurations on the switch so that you do not need to manually configure every phone with this
information. See
the phone will initiate a DHCP request on the advertised voice VLAN, VLAN 200.
Figure 36-9. LLDP Configuration for Office VOIP Deployment
FTOS#show running-config lldp
protocol lldp
advertise med
advertise med voice 200 6 46
advertise med voice-signaling 300 5 28
no disable
FTOS#show lldp neighbors
Loc PortID
-------------------------------------------------------------------------
Gi 6/10
Gi 6/11
Gi 6/22
Gi 6/23
796 | Power over Ethernet
Chapter 26, Link Layer Discovery
Rem Chassis Id
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Protocol. Based on the configuration in
Rem Port Id
001B0CDBA109:P1
001AA2197992:P1
08:00:0f:22:7f:83
08:00:0f:23:de:a9
Figure 36-9,