Remove A Unit From An S-Series Stack - Dell Force10 C150 Configuration Manual

Figure 50-15. Adding a Stack Unit with a Conflicting Stack Number—After
------------------------STANDALONE AFTER CONNECTION----------------------------------
01:38:34: %STKUNIT0-M:CP %POLLMGR-2-ALT_STACK_UNIT_STATE: Alternate Stack-unit is present
01:38:34: %STKUNIT0-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 1 present
01:38:34: %STKUNIT0-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 2 presentGoing for reboot.
Reason is Stack merge
Going for reboot. Reason is Stack merge
[bootup messages omitted]
Stack(stack-member-0)#
-----------------------------STACK AFTER CONNECTION----------------------------------
23:11:25: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 0 present
23:11:40: %STKUNIT1-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 0 down - card removed
23:12:25: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 0 present
23:12:34: %STKUNIT1-M:CP %CHMGR-5-CHECKIN: Checkin from Stack unit 0 (type S50V, 52 ports)
23:12:34: %STKUNIT1-M:CP %CHMGR-3-STACKUNIT_MISMATCH: Mismatch: Stack unit 0 is type S50V -
type S25N required
Stack#show system brief
Stack MAC : 00:01:e8:d5:f9:6f
-- Stack Info
Unit UnitType
---------------------------------------------------------------------------
0 Member
1 Management
2 Standby
3 Member
4 Member
5 Member
6 Member
7 Member
[output omitted]

Remove a Unit from an S-Series Stack

The running-configuration and startup-configuration are synchronized on all stack units. A stack member
that is disconnected from the stack maintain this configuration.
To remove a stack member from the stack, disconnect the stacking cables from the unit. You may do this at
any time, whether the unit is powered or unpowered, online or offline. Note that if you remove a unit in the
middle of the stack, the stack will be split into multiple parts, and each will form a new stack according to
the stacking algorithm described throughout this chapter.
1032 | Stacking S-Series Switches
--
Status ReqTyp
type mismatch S25N
online S50N
online S50V
not present
not present
not present
not present
not present
CurTyp Version
S50V 7.8.1.0
S50N 7.8.1.0
S50V 7.8.1.0
Ports
52
52
52