Interface Types; View Basic Interface Information - Dell Force10 C150 Configuration Manual

Interface Types

Interface Type
Physical
Management
Loopback
Null
Port Channel
VLAN

View Basic Interface Information

The user has several options for viewing interface status and configuration parameters. The
interfaces
display the interface status, IP and MAC addresses, and multiple counters for the amount and type of
traffic passing through the interface. If a port channel interface is configured, the
command can list the interfaces configured in the port channel.
Note: To end output from the system, such as the output from the
CTRL+C and FTOS will return to the command prompt.
Note: Unicast counters in the
broadcast packets.
Figure 20-1
416 | Interfaces
Modes
Possible Default Mode
L2, L3 Unset
N/A N/A
L3 L3
N/A N/A
L2, L3 L3
L2, L3 L2
command in EXEC mode will list all configurable interfaces on the chassis and has options to
show interface
displays the configuration and status information for one interface.
Requires
Creation Default State
No Shutdown (disabled)
No No Shutdown (enabled)
Yes No Shutdown (enabled)
No Enabled
Yes Shutdown (disabled)
Yes (except L2 - No Shutdown (enabled)
default) L3 - Shutdown (disabled)
show interfaces
output will increment when the interface receives multicast or
show
show interfaces
command, enter