Configuration Task List for Policy-based Routing
To enable the PBR:
1.
Create a Redirect List
2.
Create a Rule for a Redirect-list
3.
Apply a Redirect-list to an Interface using a Redirect-group
Create a Redirect List
Use the following command in CONFIGURATION mode:
Command Syntax
ip redirect-list redirect-list-name
The following example creates a redirect list by the name of "xyz."
Figure 37-3. Creating a Redirect List Example
FTOS(conf)#ip redirect-list ?
WORD
FTOS(conf)#ip redirect-list xyz
804
|
Policy-based Routing
Command Mode
CONFIGURATION
Delete the redirect list with the no ip redirect-list command.
Redirect-list name (max 16 chars)
Purpose
Create a redirect list by entering the list name.
Format: 16 characters