Dell Force10 C150 Configuration Manual page 400

You can select which process may attempt to restart, and the number of consecutive restart attempts before
failover, but by default, every process causes a system reload or RPM failover.
Task
Enable Process Restartability for a
process or task.
FTOS(conf)#process restartable radius ?
count
<cr>
FTOS(conf)#process restartable radius count ?
<1-3>
FTOS(conf)#process restartable radius count 3 ?
period
<cr>
Display the processes and tasks
configured for restartability.
FTOS#sho processes restartable
--------------------------------------------------------------------------------------------------
Process name
--------------------------------------------------------------------------------------------------
radius
tacplus
--------------------------------------------------------------------------------------------------
FTOS#show processes restartable history
--------------------------------------------------------------------------------------------------
Process name
--------------------------------------------------------------------------------------------------
radius
--------------------------------------------------------------------------------------------------
When a process restarts, FTOS displays
Message 9 System Message for Process Restarts
May 8 06:28:35: %RPM0-P:CP %TME-2-PROC_RESTART: Restarting crashed process tacplus
You can specify the timestamp in hours so that if the number of restart attempts exceeds the configured
limit within this time frame, no further process restarts are attempted. The next time a software exception
occurs within this process, the system reloads for a single-RPM system and fails over to the standby RPM
for a dual-RPM system.
When a system exceeds the configured restart threshold, FTOS displays
Message 10 System Message for Excessive Process Restarts
[for Dual RPM:] May 8 06:35:33: %RPM0-P:CP %TME-2-No More Restarts and do failover: process
tacplus reaches max restart with threshold 3
[for Single RPM:] Mar 1 10:21:47: %RPM0-P:CP %TME-2-No More Restarts: process tacplus reaches
max restart with threshold 3
400 | High Availability
Command Syntax
process restartable
hours ]
Specify max number of auto-restarts (default=3)
number of times value to auto-restarts
Specify time span for auto-restart count (default=1)
show process restartable
State How many times restarted
enabled
enabled
Timestamp last crashed
[5/23/2001 10:11:47]
Message
count number
[ process ] [ ] [
history
[ ]
Timestamp last restarted
0 [-]
0 [-]
9.
Message
Command Mode
period
CONFIGURATION
EXEC Privilege
10.