Dell Force10 C150 Configuration Manual page 1181

Table 60-3. show hardware Commands
Command
show hardware cpu data-plane
show hardware unit
Recognizing a High CPU Condition
A high CPU condition exist when any of the messages in
Message 10 High CPU Condition
Feb 13 13:56:16: %RPM1-S:CP %CHMGR-5-TASK_CPU_THRESHOLD: Cpu usage above threshold for task
"sysAdmTsk"(100.00%) in CP.
Feb 13 13:56:20: %RPM1-S:CP %CHMGR-5-CPU_THRESHOLD: Overall cp cpu usage above threshold. Cpu5SecUsage
(100)
Feb 13 13:56:20: %RPM1-S:CP %CHMGR-5-TASK_CPU_THRESHOLD_CLR: Cpu usage drops below threshold for task
"sysAdmTsk"(0.00%) in CP.
Troubleshoot a high CPU condition
If FTOS indicates a high CPU condition or you suspect one:
Step Task
debug cpu-traffic-stats
1 Enable
show cpu-traffic-stats
with the
commands indicate the physical interface through which
the questionable traffic is arriving.
show ip traffic
2 Review the
command displays the types of IP traffic destined to the
CPU.
Description
View driver-level statistics for the data-plane port on the CPU for the
specified line card or RPM.
Views advanced counters, statistics, and register information for the FP
and CSF ASICs.
, and monitor the output
command. These
command output. This
Message 10 appear.
Command Syntax
debug cpu-traffic-stats
show cpu-traffic-stats
show ip traffic
C-Series Debugging and Diagnostics | 1181
Command Mode
CONFIGURATION
EXEC Privilege
EXEC Privilege