Dell Force10 C150 Configuration Manual page 1023

Figure 50-4. Adding a Standalone with a Lower MAC Address and Equal Priority to a Stack—After
-------------------------------STANDALONE AFTER CONNECTION----------------------------------
Standalone#%STKUNIT0-M:CP %POLLMGR-2-ALT_STACK_UNIT_STATE: Alternate Stack-unit is present
00:20:20: %STKUNIT0-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 1 present
00:20:22: %STKUNIT0-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 2 present
Going for reboot. Reason is Stack merge
[bootup messages omitted]
------------------------------------STACK AFTER CONNECTION----------------------------------
Stack# 3w1d14h: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 2 present
3w1d14h: %STKUNIT1-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 2 down - card removed
3w1d14h: %STKUNIT1-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 2 present
3w1d14h: %STKUNIT1-M:CP %CHMGR-5-CHECKIN: Checkin from Stack unit 2 (type S50V, 52 ports)
3w1d14h: %S50V:2 %CHMGR-0-PS_UP: Power supply 0 in unit 2 is up
3w1d14h: %STKUNIT1-M:CP %CHMGR-5-STACKUNITUP: Stack unit 2 is up
Stack#show system brief
Stack MAC : 00:01:e8:d5:f9:6f
-- Stack Info --
Unit UnitType Status
---------------------------------------------------------------------------
0 Standby online
1 Management online
2 Member online
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
ReqTyp CurTyp
S50V S50V
S50N S50N
S50V S50V
Version Ports
7.8.1.0 52
7.8.1.0 52
7.8.1.0 52
Stacking S-Series Switches | 1023