Dell Force10 C150 Configuration Manual page 1083

Command Syntax
FTOS(conf)#clock summer-time pacific recurring Mar 14 2009 00:00 Nov 7 2009 00:00 ?
FTOS(conf)#02:02:13: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Summertime configuration changed from
"none" to "Summer time starts 00:00:00 Pacific Sat Mar 14 2009;Summer time ends 00:00:00 pacific
Sat Nov 7 2009"
Note: If you enter <CR> after entering the recurring command parameter, and you have already set a one-time daylight
saving time/date, the system will use that time and date as the recurring setting.
Command Mode Purpose
start-year:
Range: 1993 to 2035
start-time:
variable, use the 24-hour format, example, 17:15 is 5:15 pm.
end-week: If you entered a start-week,
the following as the week that daylight savings ends:
•
•
•
end-month:
English.
You can enter the name of a day to change the order of the
display to
end-day:
Range: 1 to 31.
You can enter the name of a month to change the order of the
display to
end-year:
Range: 1993 to 2035.
end-time:
variable, use the 24-hour format, example, 17:15 is 5:15 pm.
offset:
during the summer-time period.
Range: 1 to1440.
Default: 60 minutes
Enter a four-digit number as the year.
Enter the time in hours:minutes. For the hour
week-number:
enter a number from 1-4 as the number of
the week to end daylight savings time.
first:
enter the keyword first to end daylight savings time
in the first week of the month.
last:
enter the keyword last to end daylight savings time in
the last week of the month.
Enter the name of one of the 12 months in
time day month year
Enter the number of the day.
time day month year
Enter a four-digit number as the year.
Enter the time in hours:minutes. For the hour
(OPTIONAL) Enter the number of minutes to add
Enter the one of
.
.
System Time and Date | 1083