Mark Egress Packets With A Dei Value - Dell Force10 C150 Configuration Manual

Task
FTOS#show interface dei-honor
Default Drop precedence: Green
Interface
-------------------------------------------------------------
Gi 0/1
Gi 0/1
Gi 8/9
Gi 8/40

Mark Egress Packets with a DEI Value

On egress, you can set the DEI value according to a different mapping than ingress (see
Incoming DEI
Task
Set the DEI value on egress according to the color
currently assigned to the packet.
Display the DEI-marking configuration.
FTOS#show interface dei-mark
Default CFI/DEI Marking: 0
Interface
------------------------------------------------
Gi 0/1
Gi 0/1
Gi 8/9
Gi 8/40
964 | Service Provider Bridging
CFI/DEI
0
1
1
0
Value).
Drop precedence CFI/DEI
Green 0
Yellow 1
Yellow 0
Yellow 0
Command Syntax
Drop precedence
Green
Yellow
Red
Yellow
Command Syntax
dei mark green yellow
{ | } {
show interface dei-mark
[
linecard number port-set number
|
port
Command Mode
Honor the
Command Mode
0 1
| } INTERFACE
/ EXEC Privilege
interface slot
]