Set Daylight Savings Time - Dell Force10 C150 Configuration Manual

Set the timezone
Coordinated Universal Time (UTC) is the time standard based on the International Atomic Time standard,
commonly known as Greenwich Mean time. When determining system time, you must include the
differentiator between UTC and your local timezone. For example, San Jose, CA is the Pacific Timezone
with a UTC offset of -8.
Command Syntax
clock timezone timezone-name offset

Set daylight savings time

FTOS supports setting the system to daylight savings time once or on a recurring basis every year.
1080 | System Time and Date
Command Mode Purpose
CONFIGURATION Set the clock to the appropriate timezone.
timezone-name:
not use spaces.
offset:
•
•
FTOS#conf
FTOS(conf)#clock timezone Pacific -8
FTOS(conf)#01:40:19: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Timezone
configuration changed from "UTC 0 hrs 0 mins" to "Pacific -8 hrs
0 mins"
Enter the name of the timezone. Do
Enter one of the following:
a number from 1 to 23 as the number of hours in
addition to UTC for the timezone.
a minus sign (-) followed by a number from 1 to 23 as
the number of hours