Show Hardware Commands; Offline Diagnostics - Dell Force10 C150 Configuration Manual

Show hardware commands

The show hardware command tree consists of privileged EXEC commands created or changed specially
for use with the E-Series. These commands display information from a hardware sub-component, such as
the Buffer and Traffic Management (BTM) ASIC and the Forwarding and Packet Classification (FPC)
ASIC. They should be used only under the guidance of Dell Force10 technical support staff.
The following table lists the show hardware commands. For detailed information on these and other
commands, see the FTOS Command Line Interface Reference document.
Command
show hardware rpm slot-number mac counters
]
port-number
clear hardware rpm slot-number mac counters
show hardware rpm
management-port}
statistics
}
show hardware rpm
{data-plane | party-bus}
show hardware linecard
fpc forward {counters | drops | spi {err-counters |
spichannel# counters} | status}
show hardware linecard
fpc lookup detail
show running-config hardware-monitor
show cpu-interface-stats

Offline diagnostics

These diagnostics can be useful for isolating faults and debugging TeraScale hardware installed in a
chassis.
Diagnostics are invoked from the FTOS CLI. While diagnostics are running, the status can be monitored
via the CLI. The tests results are written to a file in flash memory and can be displayed on screen. Detailed
statistics for all tests are collected and include:
• last execution time
• first test pass time and last test pass time
• first test failure time and last test failure time
cp {data-plane |
slot-number
party-bus} counters |
| {
rp1 rp2
{ | }
slot-number
counters | statistics
{
port-set
number pipe-number
port-set
number pipe-number
Description
port
[ View or clear the receive- and transmit- counters
for the party-bus control switch on the IPC
subsystem of the RPM.
Display advanced debugging information for the
RPM processors.
}
Display receive and transmit counters, error
counters and status registers for the forwarding
functional area of the FPC (flexible packet
classification engine).
Display diagnostic and debug information related
to the lookup functional area of the Flexible Packet
Classification (FPC).
Display hardware-monitor action-on-error settings.
Provides an immediate snapshot of internal RPM
and line card CPU health counters.
E-Series TeraScale Debugging and Diagnostics | 1209