Leaving A Multicast Group; Mld Version 2 - Dell Force10 C150 Configuration Manual

Ftos configuration guide ftos 8.4.2.7 e-series terascale, c-series, s-series (s50/s25)
Hide thumbs Also See for Force10 C150:
Table of Contents

Advertisement

Leaving a Multicast Group

A receiver that is no longer interested in traffic for a particular group should leave the group by sending a
Done message to the link-scope all-routers multicast address, FF02::02.
When a Querier receives a Done message, it sends a Multicast-Address-Specific Query addressed to the
relevant multicast group. Hosts still interested in receiving traffic for that group (according to the
suppression mechanism) so that the group table entry is maintained. If no reports are received in response
to the query, the group membership entry is cleared and the router stops forwarding traffic for that group.

MLD version 2

MLD version 2 (MLDv2) adds source-filtering capability. A node can report interest in multicast traffic
only from specific source addresses or from all sources except for specific source addresses. MLDv2 is
backwards compatible with MLD version 1.
There are two types of MLDv2 messages
Multicast Listener Query — a message sent by the Querier to discover multicast listeners
(Figure
27-2).
General Query — a query to which all listeners should respond.
Multicast-Address-Specific Query — a query to which listeners for the specified group should
respond to affirm their membership.
Multicast-Address-and-Source-Specific Query — a query to determine if there are any listeners
interested in a group and source pair.
Version 2 Multicast Listener Report — a response to a query indicating listening state or state
changes
(Figure
Figure 27-2. MLDv2 Multicast Listener Query
Preamble
Version
Traffic Class
Flow Label
(6)
Code
Type
(0)
Code: 130: Multicast Listener Query
131: Multicast Listener Report
132: Multicast Listener Done
27-3).
Start Frame
Source MAC
Destination MAC
Delimiter
Payload Length
Next Header
(0)
Checksum
Max. Response
Reserved
Delay
IPv6 Packet
Ethernet Type
Header Extension
Hop Limit
Next Header
Length
(1)
(58)
(0)
Multicast Address
Reserved
S
Padding
FCS
Options
ICMPv6 Packet
(Router Alert)
Querier's Query
N
Querier Robustness
Interval Code
Variable
Multicast Listener Discovery | 607
Source Addresses
MLD 002

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents