Dell Force10 S4810P Reference Manual page 135

outgoing-
interface
pattern
sweep-min-size
sweep-max-size
sweep-interval
ointerface
Defaults none
Command Modes
Command History
Version 8.3.12.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.4.1.0
Version 8.3.1.0
Version 8.2.1.0
Version 8.1.1.0
Default is No.
(IPv6 link-local address) Enter the outgoing interface for ping packets
to a destination link-local address.
pattern
(IPv4 only) Enter the IPv4 data pattern. Range: 0-FFFF. Default:
0xABCD.
Enter the minimum size of datagram in sweep range. Range: 52-15359
bytes.
Enter the maximum size of datagram in sweep range. Range: 53-15359
bytes.
Enter the incremental value for sweep size. Range: 1-15308 seconds.
(IPv4 only) Enter the outgoing interface for multicast packets. Enter
the IP address in A.B.C.D format.
•
•
•
•
•
•
•
• EXEC
• EXEC Privilege
Added support for the outgoing-interface option for link-local
IPv6 addressing on the S4810.
Introduced on the Z9000.
Added support for 4-port 40G line cards on the ExaScale.
IPv6 pinging available on management interface.
Introduced extended ping options.
Introduced on the E-Series ExaScale (IPv6).
Introduced on the E-Series ExaScale (IPv4).
For an 100/1000 Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a Port Channel, enter the keyword port-channel
followed by a number. For the C-Series and S-Series: the
range is 1 to 128. For the E-Series: the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
E-Series only For the SONET interfaces, enter the keyword
sonet followed by slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
For a VLAN interface, enter the keyword vlan followed by a
number from 1 to 4094.
135