Obtaining Help - Dell Force10 S4810P Reference Manual

When another user enters CONFIGURATION mode, FTOS sends a message similar to the following:
% Warning: User "admin" on line vty2 "172.16.1.210" is in configuration
In this case, the user is "admin" on vty2.

Obtaining Help

As soon as you are in a command mode there are several ways to access help.
To obtain a list of Type a ? at the prompt or after a keyword. There must always be a space before the ?.
keywords at any
command mode:
To obtain a list of Type help at the prompt.
keywords with a
brief functional
description:
To obtain a list of Type a keyword and then type a space and a ?.
available options:
To obtain a list of Type a partial keyword and then type a ?.
partial keywords
using a partial
keyword:
Example
The following is an example of typing ip ? at the prompt:
FTOS(conf)#ip ?
access-list
as-path
community-list
domain-list
name
domain-lookup
translation
domain-name
fib
ftp
host
max-frag-count
assembly
multicast-routing
name-server
pim Protocol
prefix-list
radius
redirect-list
route
scp
source-route
options
ssh
tacacs
telnet
tftp
trace-group
trace-list
FTOS(conf)#ip
52
Named access-list
BGP autonomous system path filter
Add a community list entry
Domain name to complete unqualified host
Enable IP Domain Name System hostname
Define the default domain name
FIB configuration commands
FTP configuration commands
Add an entry to the ip hostname table
Max. fragmented packets allowed in IP re-
Enable IP multicast forwarding
Specify address of name server to use
Independent Multicast
Build a prefix list
Interface configuration for RADIUS
Named redirect-list
Establish static routes
SCP configuration commands
Process packets with source routing header
SSH configuration commands
Interface configuration for TACACS+
Specify telnet options
TFTP configuration commands
Named trace-list
Named trace-list