AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 636

Labeling
Lines or Trunks
Use this procedure to establish alphanumeric system labels for display set
telephone users to identify the line or trunk being used.
Summary: Lines or Trunks
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Posted Message
Use this procedure to add or change existing posted messages. The posted
messages allow callers with display telephones to know why the called
extension does not answer.
Each posted message can have a maximum of 16 characters. Messages 2
through 20 can be changed through programming. Message 1, Do Not Disturb,
cannot be changed
Summary: Posted Message
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
4-286
Programming Procedures
System manager
All
Not required
Form 2c, System Numbering: Line/Trunk Jacks
Not applicable
Not applicable
No
No
More → Labeling → LinesTrunks → Dial line/trunk no. →
Enter → Drop → Dial label → Enter → Exit → Exit
[ PgUp ] → [ F1 ] → [ F2 ] → Type line/trunk no. → [ F10 ] → [ Alt ] + [ P ] →
Type label → [ F6 ] → [ F5 ] → [ F5 ]
System manager, Integrated Administration
All
Not required
Form 8a, Label Form: Posted Message
First 10 messages
1 to 20
No
No