AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 614

Automatic Route Selection
Console Display/Instructions
Save your entry.
5
Select Enter.
Return to the System Programming menu.
6
Select Exit two times.
Subpattern B Procedure
1 Enter the table ( nn = 1 t
ARS Route Pattern:
Enter table (1-18) route
(1-6)
Backspace
Exit Enter
Save your entry.
2
Select Enter.
Enter a pool dial-out code of up to 3 digits on which to route calls.
3
ARS Pool (xx, x):
Enter pool dialout code
Backspace Next
Exit Enter
4 Continue to enter pool dial-out code(s) for another route or go to Step 5.
Select Next.
Save your entry.
5
Select Enter.
6 Return to the System Programmlng menu.
Select Exit two times.
Facility Restriction Level
Use this procedure to assign a Facility Restriction Level (FRL) to each route.
The FRL ranges from 0 (least restrictive) to 6 (most restrictive) and is used to
restrict user access to the route. The FRL assigned to telephones and remote
access users is the opposite of the FRL assigned to routes, where 0 is the most
restrictive and 6 is the least restrictive.
4–264
Programming Procedures
Additional Information
18 ) and the pool route ( m = 1 to 6 ) number.
O
Dial or type [ nnm ].
xx = table number entered in Step 1
x = route number entered in Step 1
Dial or type [ nnn ].
Return to Step 3. The next route will be
displayed on Line 1.
PC
[ F10 ]
[ F5 ] [ F5 ]
←
[ F10 ]
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ]