AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 40

Programming Procedures
Using Enter
Pressing Enter to save your entry will have one of the following results:
The next screen in the procedure appears. See Steps 4 and 5 in the
sample procedure below.
The screen does not change and you can enter another extension or
line/trunk. In most of these cases, Delete is also an option. Enter is used
to assign the extension to a group or to assign a feature to the extension.
Delete is used to remove the extension from a group or to remove the
feature from the extension. See Steps 5 and 6 in the sample procedure
below for an example of this type of screen.
The procedure is complete and you return to a previous screen.
Console Display/Instructions
3 Specify the extension.
BIS/HFAI Extensions
Enter extensions
xxxx
Delete
Backspace
Enter
Exit
4 Assign or remove BIS/HFAl capability.
Select Enter or
Delete.
Return to the System Programming menu.
5
Select Exit two times.
1–20
Programming Basics
Additional Information
SP: "Entering an Extension"
You may continue to assign or remove
BIS/HFAl capability to additions
extensions by repeating Steps 3 and 4.
PC
←
[ F10 ]
[ F8 ]
[ F5 ] [ F5 ]