AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 459

DID Trunks
Console Display/Instructions
7
Continue to specify type for the other trunk block or go to Step 8.
Select Next.
8 Save your entry.
Select Enter.
9 Return to the System Programming menu.
Select Exit two times.
Invalid Destination
Use this procedure to specify whereto direct outside calls (received on DID
trunks) for unassigned extension numbers. Calls can be directed to a backup
position (normally the primary system operator) or given a fast busy signal. See
"QCC Operator to Receive Call Types" in Chapter 3 for information on assigning
a backup position.
Summary: Invalid Destination
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Return to Step 6. The next block will be
displayed on Line 1.
System manager
Hybrid/PBX
Not required
Form 3d, incoming Trunks: DID
Backup (calls are sent to the primary system operator)
Backup, Fast Busy
No
No
LinesTrunks → DID → Inval Dstn → Send to Backup
Extension or Return Fast Busy → Enter → Exit → Exit
[ F4 ] → [ F4 ] → [ F9 ] → [ F1 ] or [ F2 ] → [ F10 ] → [ F5 ] → [ F5 ]
Programming Procedures
PC
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ]
4–109