AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 554

Optional Group Features
Console Procedure
PC Procedure
Group Paging
Use this procedure to assign or remove an extension from a paging group. A
paging group consists of telephone users who hear common announcements
over the telephone speakerphone. Only MLX telephones and analog multiline
telephones with speakerphones can be members of a paging group.
A maximum of six paging groups with a maximum of 10 extensions per group is
allowed. A seventh paging group, called the Page All group, is not limited and
includes all telephones connected to the system. Extensions cannot be added
to or removed from the Page All group.
To reassign an extension to a new paging group, just assign it; the extension is
automatically removed from its old paging group.
Summary: Group Paging
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
4-204
Programming Procedures
Extensions → Call Pickup → Dial pickup group no. →
Enter → Dial ext. no. → Enter → Enter → Exit → Exit
[ F6 ] → [ F9 ] → Type pickup group no. → [ F10 ] → Type ext. no.
[ F10 ] → [ F5 ] → [ F5 ]
System manager
All
Not required
Form 7b, Group Paging
Not applicable
Extension number
Yes
No
Extensions → More → Group Page → Dial paging group no.
→ Enter → Dial ext. no. → Enter → Exit → Exit
[ F6 ] → [ PgUp ] → [ F2 ] → Type paging group no. → [ F10 ] → Type
ext. no. → [ F10 ] → [ F5 ] → [ F5 ]