Optional Group Features - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Optional Group Features

Optional Group Features
This section contains programming summaries for the following optional
features:
Call Pickup Groups
Group Paging
Group Coverage Member Assignments
Group Coverage Delay Interval
Group Calling Member Assignments
Group Calling Line/Trunk or Pool Assignments
See Chapter 3, "Common Administrative Procedures," for detailed programming
information.
Call Pickup Groups
Use this procedure to assign or remove an extension from a call pickup group.
A call pickup group consists of telephone users who can answer one another's
calls by pressing a button or by dialing a code.
NOTES:
1. A maximum of 30 call pickup groups, with a maximum of 15 extensions
per group, are allowed.
2. An extension can belong to only one group.
3. Before reassigning an extension to a new group, you
its current group.
Summary: Call Pickup Groups
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
System manager
All
Not required
Form 7a, Call Pickup Groups
Not applicable
Call pickup group number, extension number
Yes
No
Programming Procedures
-
must remove it from
4–203