AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 233

Optional Group Features
Console Display/Instructions
7
Assign or remove
Select Enter or
Delete.
3
Continue to asign the extension to another coverage group or go to Step 9.
Select Next
9 Return to the System Programming menu.
Select Exit two times.
Group Coverage Delay Interval
Use this procedure to specify the number of rings before a call is sent to group
coverage receivers.
Summary: Group Coverage Delay Interval
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
extension from the coverage group.
the
You may continue to assign or remove
extensions from the coverage group by
repeating Steps 5 and 6.
Return to Step 6 to continue programming. The
next coverage group will be displayed on Line 1.
System manager
All
Not required
Form 7c, Group Coverage
Not applicable
Extension numbers
Yes
No
Options → More → Cover Delay → Drop → Enter → Dial the
number of rings → Enter → Exit
[ F ] → [ PgUp ] → [ F6 ] → [ Alt ] + [ P ] → Type the number of rings →
[ F10 ] → [ F5 ]
Common Administrative Procedures
Additional Information PC
[ F10 ]
[ F8 ]
[ F9 ]
[ F5 ] [ F5 ]
3–111