AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 520

Telephones
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
.
Assign Intercom or System Access Buttons
Use this procedure to assign or change the assignments for Intercom (ICOM)
buttons used to make and receive inside calls. This includes the following types
of Intercom buttons:
R i n g
Voice
Originate Only (Ring or Voice)
In Hybrid/PBX mode only, use this procedure to assign or change assignments
for System Access (SA) buttons used to make or receive inside and outside
calls. This procedure includes the following types of System Access buttons:
R i n g
Voice
Originate Only (Ring or Voice)
Shared (Ring or Voice)
4–170
Programming Procedures
4a, Extension Copy: Analog Multiline Telephone Template
4c, Extension Copy: MLX Telephone Template
Not applicable
Not applicable
Yes: Iines/pools assigned to an extension.
Not applicable
To copy to a single extension:
Extensions → Line Copy → Single → Dial copy from ext.
no. → Enter → Dial copy to ext. no. → Enter → Exit → Exit
To copy to a block of extensions:
Extensions → Line Copy → Block → Dial copy from ext. no.
→ Enter → Dial ext. no of first telephone in block → Enter
→ Dial ext. no of last telephone in block → Enter → Exit →
Exit
To copy to a single extension:
[ F6 ] → [ F2 ] → [ F1 ] → Type copy from ext. no. → [ F10 ] → Type
copy to ext. no. → [ F10 ] → [ F5 ] → [ F5 ]
To copy to a block of extensions:
[ F6 ] → [ F2 ] → [ F2 ] → Type copy from ext. no. → [ F10 ] → Type
ext. no. of first telephone in block → [ F10 ] → Type ext. no. of
last telephone in block → [ F10 ] → [ F5 ] → [ F5 ]