AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 231

OptionaI Group Features
An extension can be a sender in only one group; it can be a receiver for more
than one coverage group. A calling group can be assigned as a receiver for a
coverage group (see "Group Coverage Receiver"). In Hybrid/PBX mode only,
the QCC queue can be a receiver for up to 30 coverage groups. See "QCC
Operator to Receive Calls."
If the sender's extension has one or more personal lines assigned, the sender
can be assigned as the principal user so that calls received on the personal line
are sent to receivers programmed for Individual or Group Coverage. See
"Principal User for Personal Line. "
To reassign an extension to a new coverage group, just make the assignment;
the extension is automatically removed from its old group.
Summary: Group Coverage Member
Assignments
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Group Coverage Member
Assignments
Console Display/Instructions
1
Select the Extensions menu.
System Programming:
Make a selection
Extensions
System
SysRenumber Options
Tables
Operator
LinesTrunks AuxEquip
Exit NightSrvce
System manager
All
Not required
Form 7c, Group Coverage
Not applicable
Extension numbers
Yes
No
Extensions → More → Group Cover → Dial group no. →
Enter → Dial ext. no. → Enter → Exit → Exit
[ F6 ] → [ PgUp ] → [ F3 ] → Type group no. → [ F10 ] → Type ext. no.
→ [ F10 ] → [ F5 ] → [ F5 ]
Additional Information
>
Common Administrative Procedures
PC
[ F6 ]
3–109