AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 92

Using SPM
You can specify a drive letter with the filename but no path information.
Verify that the filename chosen does not already exist.
6
The following screen appears only if the filename chosen already exists.
Continue with Step 7 if this screen does not appear.
The file already exists.
If you continue. the old
version will be deleted.
Press ESC to abort.
or "c" to continue.
7 Observe the backup status screen.
Press ESC to Abort.
Est. Blocks xxx - xxxx
filename
BACKUP IN PROGRESS
Received Block xx
SPM indicates the status of the backup by displaying the number of the last
block received ( xx ). Line 2 of the display screen shows the estimated number
of blocks to be sent from the control unit (
backing up from Release 1.0.
If you abort the backup, the partial backup file is deleted to prevent restoration
from a corrupted file and you see the screen shown in Step 8.
When the backup is complete, you see the screen shown in Step 9.
To abort the backup press
8
Press ESC to Abort.
Est. Blocks xxx - xxxx
filename
BACKUP IN PROGRESS
XMODEM ABORT - User
9 When the backup is complete, press
Backup successful.
Please press Enter
to see the Main Menu
Received xxx Blocks
2-24
Programming with SPM
Press [ Esc ] to abort the backup. Go to
Step 1 to create a different backup file.
Press [ C ] to continue. Go to Step 7.
filename = the backup filename specified
in Step 5
-
XXX XXX
[ Esc ] to return to the SPM Main Menu.
.
↵
to return to the SPM Main Menu.
[ Enter ]
xxx = total number of blocks received
x ). This line is blank if you are
-