AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 99

Using SPM
If converting from Release 1.0 or 1.1, select the CONVERT TO release. To
6
convert from Release 1.2, 2.0, or 2.1 go to Step 7.
The screen below appears when converting from Release 1.0 or 1.1. Release
1.2, 2.0, and 2.1 can only be converted to Release 3.0.
Please enter your
CONVERT TO release
and press ENTER.
1.2
2.1
2.0
3.0
Enter number:
X.X
7 Follow the instructions for a floppy or a hard disk.
If the CONVERT TO file will be saved to a floppy disk, go to Step 8.
If the CONVERT TO file will be saved to the hard disk, go to Step 9.
Use the arrow keys to highlight
8
Please select file name
to convert to, or select
NEW FILE to create a new
file on selected drive.
Enter Filename:
After you press [ Enter ↵ ] , the GOTO FLOPPY statement shown above changes to
GOTO HARD DISK and the directory listing from the root directory of the disk in
Drive A appears. Continue with Step 9.
Please select file name
to convert to, or select
NEW FILE to create a new
file on selected drive.
Enter Filename:
Press ESC to abort.
9 Specify a filename for the converted file.
Highlight the name of the file you want to convert to, press [ Enter ↵ ] and go
to Step 11.
To enter a different filename, use the arrow keys to select MAKE NEW FILE
and press [ Enter ↵ ].
All characters must be entered as they
appear on the screen, including the
decimal point.
[ Enter ↵ ].
and press
GOTO FLOPPY
GOTO FLOPPY
MAKE NEW FILE
FILENAME. XXX
FILENAME.YYY
GOTO HARD DISK
MAKE NEW FILE
FILENAME.XXX
FILENAME.YYY
Programming with SPM
2-31