AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 400

Lines and Trunks
Single Line Procedure
1 Specify entry mode.
Select Entry Mode.
2 Enter the line/trunk number for LS-OD Delay.
LS-ID Delay
Enter Trunk Number for
Alert Delay
Delete
Backspace
Enter
Exit
3 Assign or remove the LS-ID Delay.
Select Enter or
Delete.
Return to the System Programming menu.
4
Select Exit two times.
Block Procedure
1 Specify the block of 20 lines associated with the 20 line buttons on the system
programming console.
Select Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80.
2 Assign the LS-ID Delay to the appropriate lines/trunks.
Return to the System Programming menu.
3
Select Exit two times.
4-50
Programming Procedures
Dial or type:
Trunk number [ nnn ]
Slot and port number * [ sspp ]
Logical ID number # [ nnn ].
You may continue to assign or remove the
LS-ID delay from additional lines/trunks
by repeating Steps 2 and 3.
Toggle the green LED on or
off as required.
On = assign the LS-ID Delay
Off = remove the LS-ID Delay
[ F6 ]
←
[ F10 ]
[ F8 ]
[ F5 ] [ F5 ]
[ F1 ]
[ F2 ]
[ F3 ]
[ F4 ]
[ F5 ] [ F5 ]