System Busy Screen - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Idle States
System Busy
Dial Code: nnnn
Exit
Figure 1–12. System Busy Screen
The screen changes to the appropriate programming screen when the system
is no longer busy.
System Forced Idle
When the entire system is forced idle, no calls can be made or received. The
following procedures can be performed only when the entire system (every line
and every extension) is idle:
Select system mode.
Identify system operator positions.
Renumber system.
Renumber boards.
Identify telephones with voice signal pairs for the Voice Announce to
Busy feature.
Identify telephones that need voice and data features.
Restore system programming information.
Identify the Music On Hold jack.
When the system is forced idle, the following occurs: multiline telephone users
hear a signal, indicating that the telephone cannot be used; display telephone
users see the message Wait: System Busy; single-line telephone users do not
hear a dial tone.
1-42
Programming Basics
Pls Wait
nnnn = a previously entered extension
S/P: ss/pp
ss/pp = the slot and port number of the
busy extension
Enter